Homalomenais mainly produced in southern Guangxi, southeastern Yunnan, southern Guangxi, Vietnam and Thailand. According to reports in the literature, Homalomena occulta has a significant effect on the treatment of proliferative spondylitis. Its main component is volatile oil
CO2 extraction experiment of Homalomena
Crush Homalomena occulta into coarse powder, weigh 350g and put it into a 1L extraction kettle (1 lb co2 extractor ), heat the extraction kettle and the desorption kettle to reach a predetermined temperature, send in a certain amount of CO2 gas, adjust the pressure of each kettle, and start circulating extraction. The desorption kettle Ⅰ The pressure is (8.0±0.5) MPa and the temperature is 50°C; the pressure of the analytical reactor II is (5.0±0.5) MPa and the temperature is 37°C.
According to the uniform design arrangement, the experiment was carried out, and the extraction yield rate was used as the evaluation index, and the influence of each factor level on the extraction effect was investigated, and the best process conditions were obtained.
That is, the optimal co2 extraction process conditions are: pressure 20MPa, temperature 60°C, and time 30min. All factors have no significant influence on the extraction effect.
In order to verify the stability of this process, we conducted 3 additional verification experiments under the above optimal conditions. The extraction yields were 1.98%, 1.97%, 2.14%, and the average extraction rate was 2.03%.
Preparation method of inclusion compound
Take a certain amount of β-cyclodextrin, add the specified amount of water and grind it evenly, pour it into the colloid mill, start the machine, keep the speed at 3000r·min-1, adjust the grinding distance to 5m, and continuously and slowly drop it with a proper amount of ethanol to dissolve The supercritical extract of Homalomena occulta, milled for a certain period of time, refrigerated at 4°C for 24h, suction filtered, washed with a small amount of water and ethanol 3 times, and dried in vacuum at 40°C to obtain the inclusion compound.
A total of 132 chemical components were separated, which are more than those separated in various literatures. Among them, 52 have a coincidence degree of 80 or more. The main components are sesquiterpenes and terpene alcohols, and the content of linalool is The highest, accounting for 10.013% of the total volatile components, consistent with the results reported in the literature.
However, the content in this experiment is slightly lower than the content of linalool in the literature. On the one hand, the composition of the separated components may be different due to the differences in the chromatographic conditions of each experiment and the sample pretreatment process; on the other hand;
On the one hand, it may be due to the needs of the prescription, in order to alleviate the “dryness” of the medicinal materials and reduce gastrointestinal irritation. After processing, some components of the volatile oil of the medicinal materials are reduced, and there are reports in the literature that the content of Millennium Jianyin Tablets is significantly lower than Medicinal materials
It may also be caused by the different origin of Homalomena occulta.
To sum up
The Homalomena occulta extract obtained by supercritical CO2 extraction method mainly contains sesquiterpenes, terpene alcohols and other substances, which have a peculiar smell. In this experiment, the stability of the Homalomena occulta extract can be increased by inclusion of β-cyclodextrin. , Mask the bad smell, and powder the liquid medicine to make it easy to prepare.
Simply the most complete
CO2 extraction process you can find
From raw material preparation, we offer you the most complete CO2 essential oil extraction process.
At the same time, more than 100 CO2 essential oil extraction methods from the laboratory are also provided for you.
Detailed explanation of CO2 extraction process steps of plant essential oils。
About the co2 extraction machine cannabis. You can read a lot of articles about cbd oil extraction from the Internet, but I can tell you for sure that they are not comprehensive at all, and even have wrong descriptions.
HOW TO CHOOSE THE RIGHT CO2 EXTRACTOR?
CO2 Extraction Machine Buyer’s Guide
As you can imagine, not all supercritical CO2 extractors are made the same.
For more than 30 years, we have customized many CO2 extraction machines (Tabletop CO2 Extractor) for many companies and university laboratories (1 lb CO2 extractor). Because each customer’s CO2 extraction process requirements are different, there are almost no identical machines.
How many liters of CO2 extraction vessel are needed？
The first factor that determines the size of the CO2 extraction vessel is the daily working hours of the plant, which determines the daily extraction batch. The vessel size of the CO2 extractor depends on the biomass to be processed per day.
How many separators are needed?
How can I custom my separator when I need more terpenes in my How can I custom my separators when need more terpenes in CBD oil extraction process? Waxes separation and Light oil separation in 1st separator; Light oil separation in 2nd separator; To trap lightest and volatile compounds in 3rd separator. It is important to choose the right vessel size that will meet your current needs as well as future demand.
How many pressure is best for your CO2 extraction process requirements?
The choice of CO2 extraction pressure is a changing factor. If the extraction pressure is too high, the useless substances in the plant will be extracted, such as wax and chlorophyll. If the extraction pressure is too low, the extraction time will be increased.
How can the minimum operating costs be achieved?
Further Reading: CBD Oil CO2 Extraction Machine